Tesla EV Cord Organizer | EV Hover Version 3 | Electric Vehicle Charging Cord Holder Mount
Check it out guys we now have a version three for the Eevee hover if you have not seen version two of this product the purpose is to keep your charging cord off the ground in your garage walkway by keeping it organized above you made 100%
In the USA the Eevee hover is now 9.5 ft long extendable 180° swivel arm that it folds away against the wall my name is Evan and if you’re new here welcome this elevated charging arm improves garage safety organization and also helps out with space efficiency not only does this
Work for your Tesla but also any Electric vehicle with various charging adapters made from lightweight aluminum it can support all EV charging cords and the entire unit can be mounted onto drywall into a stud or even brick stone and concrete installing this took me only 15 minutes looking at the packaging
It’s all pretty straightforward if you’ve ever installed a TV mount in your home it’s a pretty similar process comparing this to the second generation kit the new eeve hover is now 9.5 ft long to reach all the way across another vehicle for the charging port there’s no
Longer any zip ties to hold the cord over the arm but rather now there’s velcro straps that can be easily removed and adjusted should you need to take down the cord if you do not need the arm to be quite 9 1/2 ft long you can certainly just purchase the shorter EB
Hover that is 6.5 ft long getting right into the install we first want to unscrew these two bottom screws so the back plate can be removed like so use a stud finder in your ideal charging location and find the correct height for the back plate to be installed I used
One of the screws to push a small hole into the drywall to mark my spot through the back plate there are a total of four holes to Mark with this plate drill the four holes using a bit slightly smaller than the included screws after the holes
Are present and you know there’s a stud behind the dryw wall take the face plate and ensure the correct orientation install one screw and use the included level to see if you need to make any small adjustments after these four screws are installed take your e hover arm and
Install it at a slight angle upward ensuring the plates align with each other and that the arm is connected into the two holes at the top of the two screws install the two screws at the bottom and Shing they’re nice and tight fully extend the charging arm outward
And take your cable hook as it slides right onto the arm take the included four screws and turn them into place over the hook attachment use the included velcro straps to place the charging cord over the arm then just hang the end of your charging cord on the hook and fold up
The arms against the wall and that’s all for the installation as you can see it’s a big Improvement now that it’s elevated above me rather than getting all dirty on the ground not to mention the trip Hazard I had earlier overall version 3 had brought the best
Of both worlds for people who like the longer and shorter arms depending on their garage setup the velcro straps make it easier to adjust the cord on the arm and also to remove it quickly without having to cut zip ties what do you think let me know in the comments
Below if you haven’t noticed I also have this mobile charger cap protector should I accidentally drop the charger the damage should be minimal especially if it were to hit my car I’ll have links below this video should you be interested in getting one for yourself along with with the Eevee hover kit they
Are also offering all my subscribers a coupon to use that check out to save some extra money to see even more accessories from every video I’ve created be sure to check out my new website everything you want to know about Tesla with the lay accessories can
Now be found in one place my name is Evan until the next video stay safe and I’ll catch you in the next one bye
We now have a version 3 for the EV Hover. If you have not yet seen version two of this product, the purpose is to keep your charging cord off the ground in your garage walkway by keeping it organized above you. Made 100% in the USA the EV Hover is a 9.5 foot long extendable 180 degree swivel arm that folds away against the wall. My name is Evan and if you are new here, welcome.
___________________________
See MORE Accessories! 👉🏻 https://emtesla.com/general-2
EV Hover Arm 👉🏻 https://bit.ly/3JaUnsg (Coupon Code: Evan)
Charger Cap Protector 👉🏻 https://amzn.to/3DM2o6C
Tesla Charging Garage Sign 👉🏻 https://tidd.ly/31LcxO9
___________________________
This elevated charging arm improves garage safety, organization, and also helps with space efficiency. Not only does this work for your tesla but almost any electric vehicle with various charging adapters. Made from lightweight aluminum, it can support most EV charging cords and the entire unit can be mounted on drywall into a stud or even brick, stone, and concrete. Installing this took me only 15 minutes. Looking at the packaging, it’s all pretty straight forward. If you have ever installed a TV mount in your home, you’ll find this super easy to put up as this follows a very similar concept. Comparing this with the second generation kit, the new EV Hover is now only 9.5 feet long to reach across another vehicle from the charging port. There are also no longer any zip ties to hold the cord over the arm but rather velcro straps that can easily be removed and adjusted should you need to take down the cord. If you do not need the arm to be quite 9.5 long, you can certainly just purchase the shorter EV hover that is 6.5 feet in length.
Getting right into the install we first want to unscrew these two bottom screws so the back plate can be removed like so. Use a stud finder in your ideal charging location and find the correct height for the back plate to be installed. I used one of the screws to push a small hold into the drywall to mark my spot through the back plate. There are a total of four holes to mark with this plate. Drill the four holes using a bit slightly smaller than the included screws. After the holes are present and you know there is a stud behind the drywall, take the faceplate and ensure the correct orientation. Install one screw and use the included level to see if you need to make any small adjustments. After these four screws are installed take your EV Hover arm and install it at a slight angle upward ensuring the plates align with each other and that the arm is connected into the two holes of the top two screws. Install the two screws on the bottom ensuring they are nice and tight.
Fully extend the charging arm outward and take your cable hook as it slides right onto the arm. Take the included 4 screws and turn them into place over the hook attachment. Use the included velcro straps to place the charging cord over the arm. Then just hang the end of your charging cord onto the hook and fold the arms up against the wall. And that’s all for this installation, as you can see it’s a big improvement now that it’s elevated above me rather than getting all dirty on the ground. Not to mention the trip hazard I had earlier.
Overall version three has brought the best of both worlds for people who like both the longer and shorter arms depending on their garage setup. The velcro scraps make it easier to adjust the cord on the arm and to also remove it quickly without having to cut zip ties.
What do you think? Let me know in the comments below… If you haven’t noticed, I also have this mobile charger cap protector. Should I accidentally drop the charger, the damage should be minimal especially if it were to hit my car. I have links below this video should you be interested in getting one yourself along with the EV Hover Kit.
Tesla EV Cord Organizer | EV Hover Version 3 | Electric Vehicle Charging Cord Holder Mount
