I have my Godspeeds on the lowest setting as far as ride height, but id like to squeeze an extra inch or two in if there’s any way to. I’m running factory stiffness and preload at the moment, but ride quality isn’t much of a priority for me. Let me know if anybody has any suggestions!
by Mr_PianoManBoyThing
8 Comments
Delete the springs and use washers instead
Angle grind the bottom mounting tabs off and re-weld them lower.
Cut out the top hat mount and build it up two inches and weld the mount back in.
Clearly /s
You likely need different coils, like extreme lows. Shorter strut bodies
If you have the helper springs and perches pulled it’s time to shop for new suspension.
godspeed don’t go low enough and ride like booty buttcheeks
No springs run hockey pucks
1) Increase your preload. Compressing your spring will give you a few more threads at the bottom to spin the coil down.
2) Remove the preload locking collars. You won’t have preload if you do this but it will drop you down 1-2 inches.
3) Shorter spring. Don’t cut your damn spring, buy a smaller set with similar or higher spring rate for like $200. Then remove and replace them onto your coil. Ensure they fit before you buy.
Shorter spring is the best way PLEASE don’t do wat some of these comments r saying lmao. However much lower you want to go, get a spring that is that much shorter than the ones you have now