After countless hours and I really don’t wanna figure up a bill…. She’s in 1 peice and driving!
Took it apart in October of 2021,got it driving in April of 2023! Lots of help along the way. Here’s what I done
Basically a frame off/restomod.
New (used) frame-POR15 the whole thing
Had the Big Block built (Pretty mild by Big Block Standards)
Shift kit and cleaning of the TH400 with 2800 Stall
Gear Vender OD
Aluminum driveline
Rebuilt the factory 12 bolt with a locker and 3.73s
Willwood brakes on the front with slotted and drilled rotors (rebuilt the rear drums)
Qa1 coil overs and tubular A arms
Qa1 front sway bar
She’s not done, I have some kinks to work out!
Slight vibration between 40-50 and a little around 70mph
Front left turn signal doesn’t work… Thinking it’s in the column…. And messing with the carb too but it’s fun! Put a tad over 200 miles on it over the weekend.
Big thanks to everyone that helped me a long the way, I’m sure I’m going to forget some of you
Russell W. Hoaglin, Ed Heavelow , Tyler Mcdowell and also Carley Hoaglin for putting up with me!
