This is my first ever suspension tweaking install. Only did the rear for today, might come around doing the front next week. Overall, the drop made it look perfect and there is no longer any noticeable gap. Only thing to work on is the front and dialing in the fitment. I also cut off part of the bumper stoppers on the rear struts based on what everyone else was doing on YouTube tutorials lol.
This might be a dumb question, but is it safe to drive for the next 7 days with only the rear being done and no alignment being done as well?? I’ve researched and people with D2 Lowering springs said that they never even got a camber kit or alignment. So… what should I do? Just drive it until I put the front lowering springs on?
by ryanrako23
5 Comments
Yeah send it I’ve driven worse
you can drive it, you’ll be fine
Get a 10 or 15mm spacer for the rear
Minus the obvious cosmetic abnormality…you’ll be good for a week like this as long as you’re not driving through tanks of gas.
It’s good practice to get your shit realigned pretty much every time you replace or completely remove your struts from the car. Not always necessary, but I would definitely have it done being that it will be sitting significantly lower than stock once the front is installed.
you could drive that for 2 years if you wanted to